Model Making

In July I took a model making course with Eliot Gibons as part of Coleg y Cymoedd Make courses.

Here are the results:

Clay model

Resin 3D print

Painted 3D print

                                            

Painted 3D print structure, cut off the print

Varnished 3D print

This is the 3D filament print of the 2nd model I made on the 'Clay' software. This is before I removed the structure.

Here it is after removing the structure & repairing one of the legs which came unravelled as I removed the 'structure'. I will wait for the epoxy clay to dry before painting it.